lens2

Bradley Engineering Camball 3

Continuing to build on the success of the CamBall series, the CamBall 3 takes a number of steps forward.  Keeping all the features of the original unit but replacing the internal sensor and lens with a far more advanced package.  It retains the full, simultaneous control of Pan, Tilt, Zoom and Focus, with smooth-move, feedback controlled motors.

The unit now boasts a 30x optical zoom matched to a larger and higher resolution sensor with increased low light sensitivity and outputs up to 1080p

Wide angle lenses can still be fitted inside the carbon housing by simply pulling off the 'O-ring' sealed front port, screwing the lens onto the camera and replacing the port.  Internally the camera is fitted onto a slide plate and can be adjusted fore and aft.

The Cam-Ball 3 is fully weatherproof and can withstand extended periods outside in all types of weather.  Slipping clutches are fitted to both axes to protect the mechanics from external forces and to make rigging very easy.  It can be mounted either way up.  

Slip rings enable continuous 360 degree pans.  All the SD and HD signals pass through the slip rings and both SD or HDSDI outputs are available on the base together with the 1080p analogue output signals. 

The camera offers full HD broadcast images and is remotely SD/HD switchable.  Wide angle converters can easily be attached to the camera.  All camera functions can be remotely controlled via our RCPs.  The Infrared mode is also activated remotely.  This camera is used on many high end prestige programmes worldwide and quality matches many larger cameras.

32 preset positions can be memorised and re-called.  This includes: Pan, Tilt, Zoom and Focus for each preset.  These positions, and all the camera settings, are automatically stored into non-volatile memory when set or adjusted. 

Clutch slip, even when powered down, does not affect the preset positions.  Absolute position sensors are used on the shafts so it always knows where it is.

Various options and accessories are available and, as with all our units, it will operate with any of our controllers no matter how old they may be.  Up to 99 remote heads can be indivdually addressed and used on a single system.

Quote <Back to list